Remove Dried Concrete and Mortar

Featured Product: Concrete Mortar Dissolver


Tired of chipping away the concrete from your tools?

Looking for a safe method for cleaning tools, siding or even vehicles?

Sakrete Concrete Mortar Dissolver is a user friendly solution that dissolves concrete and mortar from tools and other surfaces.


APPLICATION

  • Completely saturate the area of hardened concrete or mortar to be removed with undiluted Concrete Mortar Dissolver.
  • The surface will turn white on contact as the Dissolver begins to safely breakdown the material.
  • Re-apply Concrete Mortar Dissolver to reactivate as needed until concrete or mortar has softened.


This non-hazardous formula is 100 percent biodegradable, contains no harmful acids, and will not harm wood, plastic, metal or paint. You can clean up cured concrete and masonry residue on siding, vinyl, wooden decks, even splatter on cars and trucks without damaging paint surfaces.

Easy to use, just spray and watch the concrete/mortar dissolve and then rinse or wipe away.


NO GLOVES NECESSARY!

DO NOT RINSE until you are ready to wipe clean. The dissolving properties of Sakrete Concrete Mortar Dissolver stops once water is introduced.


For complete product information, please refer to the product data sheet.

Concrete & Sand Mix

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Post Setting - Round Post

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Post Setting - Square Post

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Filling a Round Hole (For Post Supports) and Filling Sakrete Form Tubes

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Polymeric Sand/Paver Set/Perma Sand

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


US Cold Patch

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


All Weather Black Top Patch

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Maximizer

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Maximizer Post Setting - Round Post

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Maximizer Post Setting - Square Post

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Maximizer Filling a Round Hole and Filling Sakrete Form Tubes

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Mortar Mix

Calculated results will reflect how many bags are needed for Block and Brick.

Enter the number of bricks (8" x 2" x 4") or blocks (8" x 8" x16") in the box below that you plan to use for your project. The calculator will then tell you the number of bags you need based on the different size of bags we carry.

This calculator is based on a 3/8" mortar joint. All yields are approximate and do not include an allowance for waste, uneven subgrade or any other variations from the joint size and brick and block sizes noted above.

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Surface Bonding Cement

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Sand

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Top'n Bond & Flo-Coat

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


B-1 Leveler

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


 

Amount Required


Results will change if form of measurement is updated.



Where to buy      Concrete Calculators      Product Videos