Adhering Pavers and Blocks

Featured Product: Polyurethane Construction Adhesive


Sakrete Polyurethane Construction Adhesive can be used with a variety of surface types where a superior adhesive material is required.

  • For use with concrete, stone, brick, wood, roof tiles, ceramic tiles and metal work.
  • A one component adhesive with superior bonding capability.
  • Can be used to fill cracks in concrete.


Common uses for Polyurethane Construction Adhesive:

  • Block, brick, paver or stone stacking projects - (nonstructural).
  • Bond cap stones to patio walls.
  • Bond sub floors in place.
  • Bond wall niches in place


APPLICATION
Always wear gloves when applying polyurethane-based repair material.

  • Cut the tip of the tube to the desired bead size of material needed.
  • Insert the tube into a caulk gun.
  • Apply the Polyurethane Construction Adhesive in a zigzag pattern.
  • Press the items you are working with firmly together to ensure good contact with the Polyurethane Construction Adhesive.
  • Allow the Polyurethane Construction Adhesive to set for 24 hours.


For complete product information, refer to the product data sheet.

Concrete & Sand Mix

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Post Setting - Round Post

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Post Setting - Square Post

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Filling a Round Hole (For Post Supports) and Filling Sakrete Form Tubes

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Polymeric Sand/Paver Set/Perma Sand

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


US Cold Patch

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


All Weather Black Top Patch

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Maximizer

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Maximizer Post Setting - Round Post

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Maximizer Post Setting - Square Post

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Maximizer Filling a Round Hole and Filling Sakrete Form Tubes

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Mortar Mix

Calculated results will reflect how many bags are needed for Block and Brick.

Enter the number of bricks (8" x 2" x 4") or blocks (8" x 8" x16") in the box below that you plan to use for your project. The calculator will then tell you the number of bags you need based on the different size of bags we carry.

This calculator is based on a 3/8" mortar joint. All yields are approximate and do not include an allowance for waste, uneven subgrade or any other variations from the joint size and brick and block sizes noted above.

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Surface Bonding Cement

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Sand

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


Top'n Bond & Flo-Coat

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


B-1 Leveler

All values are required and must be written numerically with decimals.
(Ex. 2, 2.25, or .5)


 

Amount Required


Results will change if form of measurement is updated.



Where to buy      Concrete Calculators      Product Videos