Repair Broken Concrete Corners
Featured Product: Fast Setting Cement Patcher
- Remove broken or loose concrete. This may require chiseling out any concrete pieces that feel or appear to be loose or unstable.
- Once the loose and unstable concrete has been removed, dampen the repair area with water. This will prevent the dry existing concrete from pulling the moisture from the repair material too quickly which weakens the bond.
- Mix the Sakrete Fast Setting Cement Patcher according to the mixing instructions. Add the dry material to the container of water to ensure proper material mixing.
- Using a margin trowel, thoroughly mix the material until all lumps have disappeared. Once mixed, use the trowel to place the material in the repair area and work the material into the voids and pockets underneath.
- Using a finishing trowel, smooth off the surface of the repair, scraping away any excessive material. Use the trowel to put a neat edge on the patch and remove material from the joint area.
- Complete the repair by using a brush to smooth any existing seams and blend the repaired area into the existing concrete.
Tip: When using Fast Setting Cement Patcher at 1/4 inch, Sakrete Bonder & Fortifier must be used.
For complete product information, please refer to the product data sheet.
- Concrete & Sand Mix
- Post Setting - Round Post
- Post Setting - Square Post
- Filling a Round Hole (For Post Supports) and Filling Sakrete Form Tubes
- Polymeric Sand/Paver Set/Perma Sand
- US Cold Patch
- All Weather Black Top Patch
- Maximizer Post Setting - Round Post
- Maximizer Post Setting - Square Post
- Maximizer Filling a Round Hole and Filling Sakrete Form Tubes
- Mortar Mix
- Surface Bonding Cement
- Top'n Bond & Flo-Coat
- B-1 Leveler
Calculated results will reflect how many bags are needed for Block and Brick.
Enter the number of bricks (8" x 2" x 4") or blocks (8" x 8" x16") in the box below that you plan to use for your project. The calculator will then tell you the number of bags you need based on the different size of bags we carry.
This calculator is based on a 3/8" mortar joint. All yields are approximate and do not include an allowance for waste, uneven subgrade or any other variations from the joint size and brick and block sizes noted above.
Results will change if form of measurement is updated.